From the cost to the maintenance level, cedar has been difficult to attain in the past. But, cedar shakes aren't easy for everyone to have.
#Shaker vinyl siding colors plus
Because of this, cedar shingles are installed with three overlapping layers to protect from weather penetration, while cedar shakes only require two layers plus the felt for similar protection.In many parts of the country, cedar shake siding is a dream for most people. Shingles, by contrast, don’t require the interleaving of felt paper between courses. The joints between the shakes must also be offset by around 1 ½” or more between courses so that water doesn’t run down between each individual shake.
This makes it easier for an individual shake to be pried off by wind or for moisture to penetrate between the shakes.ĭue to this fact, when cedar shake siding is used on a roof, a layer of felt paper needs to be installed between each course of shakes to protect against water penetration (this is called interleaving). One thing to keep in mind, however, is that since shake is less uniform in size and thickness, they don’t lay quite as flat as shingles when they are installed. There are some minor differences in how the two different types of wood are installed.īoth wood shingles and shake are relatively equally as durable, although shakes may last a bit longer due to their thicker nature. Shakes, on the other hand, are best used with homes in which a more rustic look is desired, for example country-style cottages. Wood or cedar shingles tends to work better with a larger variety of housing styles, since they are not as rustic looking.
The main difference between them is the overall look they will lend to the home once installed. Both shingles and shake can be used for roofing, as well as to cover exterior walls. There are no real differences in where you can use one product over another. Here is what you can expect from each cladding options: Overall appearance is the primary difference with shake shingle siding. Shake Shingle Siding – Differences In Appearance In general, you can expect shake to last a little longer than shingles, primarily because they are thicker, but the difference is not that substantial. This means that shake results in a more rustic, natural or country look. Shakes are more natural-looking and not of uniform thickness. There are also hand-split and resawn shakes that are split on one side and sawn on the other and fall between the two in terms of how rustic they look. There are two types of shakes however – hand-split shake is less uniform and more rustic looking, while taper-sawn shake looks more like a shingle because they are more refined. More rustic, thicker in some areas and grooved, not uniform in thickness, usually ½” – ¾” thick at butt. They are available in a wide variety of materials, including cedar, pine, vinyl, engineered wood or fiber cement. Most shingles are roughly 1/2″ thick and vary in length depending on the brand. They are more uniform in appearance and therefore provide a more refined look. Shingles have the same uniform thickness, a smooth surface and are usually 3/8” – ½” thick at butt. Homeowners can expect to pay more in maintenance and repair costs for any type of wood than you would for other options, such as vinyl or aluminum. ft., with about $3 of that cost being attributed to installation costs.
Homeowners can expect materials and labor to run you in the neighborhood of $3.50 – $6.50 per sq.
0 kommentar(er)
